Which Sandpaper Grit for Drywall
Sanding drywall is a critical step that determines the quality of your finished walls. Even the best joint compound application can seem imperfect if the sanding is not handled with care. Knowing what grit sandpaper for drywall to use at different stages ensures that your surface becomes paint-ready and professional. The process is not about force but about control.
When executed with precision, drywall sanding levels joints, eliminates imperfections, and results in a flawless, seamless surface ready for painting.
Importance of Sandpaper Grit in Drywall Sanding
The grit number on sandpaper shows how coarse or fine the abrasive surface is. A lower number means the sandpaper is coarse and removes material quickly, while a higher number provides a smoother finish. Choosing the right grit size for drywall prevents damage such as paper face scratches, swirl marks, or uneven patches.
If the grit is too coarse, it can tear through the compound or leave swirl marks that show up under paint. If it’s too fine too early, it can fail to remove ridges effectively. The goal is to move gradually from medium to fine grit for a seamless finish.
Ideal Grit Sequence for Sanding Drywall
Professional drywall finishers typically follow a progressive grit progression to achieve optimal results:
• 100–120 grit: Ideal for rough sanding to remove uneven spots after joint compound application. This grit should be used lightly to prevent surface tearing.
• 120–150 grit: Ideal for smoothing joints and seams once the major imperfections are removed. This grit provides the main surface refining phase.
• 180–220 grit: Finishes the surface for primer application. It creates a consistent surface without marks.
This sequence ensures each layer of compound is smoothed correctly, resulting in a durable wall.
Essential Tools for Effective Drywall Sanding
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain smooth contact, reduces fatigue, and keeps dust under control.
Common tools include:
• Hand sander for detail work
• Telescopic pole sander for ceilings
• Sanding sponges for corners and curved areas
• Perforated sandpapers for dust reduction
• Mask to prevent dust exposure
• Side lighting to identify flaws
These tools help ensure smooth, uniform results without damaging the drywall paper.
How to Sand Drywall Like a Pro
Sanding drywall is a careful process. Following professional techniques prevents common surface flaws and ensures your work looks flawless once painted.
1. Let the Joint Compound Dry Completely
Always wait for what grit sandpaper for drywall before painting the compound to dry fully before sanding. Partially dried mud will clog sandpaper and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for clean results.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining gentle rhythm. Excessive pressure can create gouges.
3. Feather the Edges
Blend the joint compound smoothly into the drywall using light overlapping passes. Focus on transitions rather than flat surfaces to create a smooth appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight imperfections that might not be visible head-on. This ensures all imperfections are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This stage perfects the finish and prepares the wall for the final coat.
Sanding Corners and Tight Spots
Corners and edges need gentle technique. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with minimal pressure to avoid damaging the tape or paper.
For inside corners, a few light passes are usually enough to blend the edges without thinning the surface material. Gentle, even sanding is the key to maintaining joint integrity.
Common Sanding Mistakes to Avoid
Many DIY finishers make the mistake of being too aggressive or skipping crucial steps. To achieve a high-quality outcome, avoid the following:
• Cutting into the drywall surface
• Choosing the wrong grit
• Forcing the sandpaper into the wall
• Neglecting to check under light
• Ignoring safety precautions such as dust masks
Time, care, and accuracy matter more than speed during drywall sanding.
Final Steps Before Painting Drywall
Before applying paint, ensure that the wall is completely free from dust and residue. Wipe the surface with a microfibre cloth or a vacuum attachment designed for drywall dust. Check all areas under good lighting to confirm a consistent finish. Using final drywall sanding grit ensures a flawless and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to bond evenly, preventing uneven coating and ensuring a clean, flawless finish.
Wrapping Up
Mastering the correct drywall sanding grit to use at each stage can elevate the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that perfect surface.
By combining the right tools, lighting, and a steady approach, you can achieve a flawless drywall finish that looks impeccable under any paint or lighting condition. Careful sanding and control are the true secrets to expert-level drywall finishing.